*All Pictures shown are for illustration purposes only. Actual product may vary due to product enhancement*
1-year/1000 hours Warranty with Free parts and Service Guidance!
Master industrial generator sets are fully integrated power generation systems that provide optimum performance, dependability, and versatility for standby and prime power applications.
Powered by Volvo engine, Stamford alternator, and SmartGen control panel
Prime power
This rating is for continuous electrical power supply (at variable load). There is no limit on the annual hours of operation, and 10% overload power can be supplied for 1 hour in 12.
Standby power
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Features:
Every generator set is subjected to a comprehensive test program which includes 50% load, 75% load, 100% load, 110% load and the checking and proving of all control and safety shut-down functions
24V DC start motor
Equipped 24V high-performance maintenance-free lead-acid starting batteries
Equipped with industrial silencer and flexible exhaust hose
Designed to Comply with ISO8528/GB2820
Volvo Engine Technical Data:
Model: TAD753GE
Manufacturer: Volvo Penta
Number of Cylinders: 6 Cylinders, Vertical In line
Cycle: 4 Stroke
Aspiration: Wastegate Turbocharger
Bore x Stroke: 108 mm x 130 mm
Displacement: 7.15 L
Compression Ratio: 18:1
Prime Power with Fan / Speed: 192 kW / 1800 rpm
Standby Power with Fan / Speed: 213 kW / 1800 rpm
Speed Governor: ECM
Cooling System: Forced Liquid Cooling Cycle
Steady Speed Drop: ≤ 1%
Total Lubrication System Capacity: 34 L
Fuel Consumption at 100% Load: 217 g/kW h
Starter Motor: DC24V
Alternator: DC24V
Stamford Alternator Technical Data
Alternator Model: UCI274G
Continuous Power: 183 kW
Frequency / Speed: 60Hz / 1800rpm
Exciter Type: Single Bearing, Brushless, Self-excited
Power Factor: 0.8
Voltage Adjust Range: ≥ 5%
Voltage Regulation NL-FL: ≤ ±1%
Insulation Grade: H
Protection Grade: IP23
Phase: 3
CSA Approved
SmartGen Control Panel Technical Data:
Model: HGM6110CAN
The control module gives digital readouts of:
Generator voltage
Output Frequency
Engine speed
Battery voltage
Engine hours run
The control module has indicators for failure information:
Overspeed/Underspeed
Emergency stop
Low oil pressure
High water temperature
Failure to start
Battery charger failure
Automatic shutdown occurs under:
Low engine oil pressure
High engine water temperature
Overspeed/Underspeed
Failure to start after three attempts
8-10 Week Lead Time
Options/Add-Ons Available