
1-year/1000 hours Warranty with Free parts and service guidance!
Master industrial generator sets are fully integrated power generation systems that provide optimum performance, dependability, and versatility for standby and prime power applications.
Powered by Cummins Diesel Engine, Stamford CSA Approved Alternator and SmartGen Control Panel
Included Features:
-
Technologically advanced Remote Wifi Controller
-
Next-Generation Brushless Stamford CSA Approved Alternator
-
Inbuilt Coolant Heater to prevent cold starts and increase the engine's longevity.
- Silent Soundproof Weather Protection Canopy/Enclosure
- Electronic Speed Governor
- Base Fuel Tank
Battery Brand: Camel battery
Relay Brand: Siemens APT
Micro Brand: LS
Wire Pipes: PA Corrugated pipes
Prime power
This rating is for continuous electrical power supply (at variable load). There is no limit on the annual hours of operation, and 10% overload power can be supplied for 1 hour in 12.
Standby power
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Features:
Every generator set is subjected to a comprehensive test program which includes 50% load, 75% load, 100% load, 110% load and the checking and proving of all control and safety shut-down functions
Equipped with a 24V DC start motor & 24V high-performance maintenance-free lead-acid starting batteries
Equipped with industrial silencer and flexible exhaust hose
Designed to Comply with ISO8528/GB2820
Cummins Engine technical data:
Model: 4BTA3.9-G2
Manufacturer: Cummins
Number of Cylinders: 4 Cylinders, Vertical inline
Cycle: 4 Stroke
Aspiration: Turbocharged & Aftercooled
Bore*Stroke: 102mm*120mm
Displacement: 3.9L
Compression Ratio: 17.3:1
Prime power/Speed: 67kW/1800rpm
Standby Power/Speed: 74kW/1800rpm
Speed Governor: Electrical
Cooling System: Forced Liquid Cooling Cycle
Steady Speed Drop: ≤1%
Total Lubrication System Capacity: 10.9L
Coolant Capacity: 8.3L
Fuel Consumption at 100% Load: 214g/kW h
Starter Motor: DC24V
Alternator: DC24V
Stamford Alternator Technical Data:
Alternator Model: UCI224F CSA Approved
Max Power: 60 kW
Frequency/Speed: 60Hz/1800rpm
Exciter Type: Single Bearing, Brushless, Self-excited
Power Factor: 0.8
Voltage Adjust Range: ≥5%
Voltage Regulation NL-FL: ≤+1%
Insulation Grade: H
Protection Grade: IP23
Phase: 3
SmartGen Control Panel Technical Data:
Model: HGM6110
The control module gives digital readouts of:
- Generator voltage
- Output frequency
- Engine speed
- Battery voltage
- Engine hours run
The control module has indicators for failure information:
- Overspeed/Underspeed
- Emergency stop
- Low oil pressure
- High water temperature
- Failure to start
- Battery charger failure
Automatic shutdown occurs under:
- Low engine oil pressure
- High engine water temperature
- Overspeed/Underspeed
- Failure to start after three attempts
8-10 Weeks Lead Time
OPTIONS/ADD-ONS AVAILABLE
For more details, call or text:+1 (647) 363-5872
*All Pictures shown are for illustration purposes only. Actual product may vary due to product enhancement*